dst11-t193-h2o series

The product series dst11-t193-h2o combines the features and reliability of OsTech Laser- and TEC controllers with diode laser modules to a turn key laser source. It could be powered by an input voltage of 110~230VAC with power factor correction. Normally the optical power output is located at the back panel. The optical power could be chosen between 100W and 500W. Lasers are water cooled. Multiple laser protection features are incorporated.

As user interface we provide the front panel display, RS232 and an optical isolated analog interface. Cw and pulsed modes are supported. Typical rise time is 25µs, shorter rise times are achievable on request.

It is possible to provide your own laser diode to OsTech. Otherwise we choose the best suited laser for your application.

Any question or request are welcome to discuss with our engineers.

Features

•from 100W to 500W optical output power in cw-mode (qcw power up to 1kW)

•housing 19“rack mount, 3HU, depth 340mm/400mm(13"4/15"8)

•input 110V-240V AC

•typical optical output - NA 0.22; fiber core diameter 100, 200, 400 or 600µm; fiber receptacle SMA, D80 or QBH
depending on power air or water cooled, others on request

•key switch, emergency stop, Interlock and LaserOn signal

•operation modes: cw, internal digital modulation, external analog or digital Modulation, pulse or pulse burst mode
internally or externally triggered, gated mode

•rise/fall-time typ. 25..50µsec

•front panel display with touch keys

•RS232-Interface, control software and labview VI is provided for download

•isolated industrial interface, SysOk and LaserOn-Output, LaserOn-and modulation input and others

•various protection features for safety of the laser diode

•PC-interface for configuration and control by LabVIEW ^TM

•system is prepared for water cooling

•Water connector: 12mm push in fittings OD calibrated (optional others f.e. OD 8mm), water flow and pressure drop
depends on laser diode and power loss

Options

•dual wavelength

•USB or Ethernet

•low noise optical output

•short rise- / fall-time (1..10µs)

•pilot-laser if available on laser

•optical power monitor

•fiber detection sensor, depending on laser diode

•metal armoured fiber cable, variable length

•laser diode provided from customer

•suitable industrial chillers in 19" 3HU
•PLC compatible control voltages
•metal armoured fiber cable, variable length, incorporating mode stripping with passive cooling, fibre breakage,
connectivity and connector temperature sensing

•laser diode provided from customer for integration

Application examples

•Plastic welding

•Soldering

•Illumination

•Selective laser melting
•Heat treatment

•Medicine

request